Overview
- Increased adherence over any type of surface
- Ideal to create a strong adhesion in cement products
- Interior and exterior
The CIMENTART PRIMER PLUS is a synthetic liquid made of acrylic copolymers that is used to enhance the adherence of the CimentArt Microcement and micro-mortars to the surfaces where they are applied. In this case, the PLUS version is for surface with low absorption rate like (tiles, wood, porcelains, marble, etc.)
With the application of the CIMENTART PRIMARY PLUS, you achieve:
- A better adherence over any kind of surface.
- An increased cohesion of the surface.
- An increased impermeability.
- An increased durability.
- An increased resistance to cracks.
- An increased resistance to a possible alkaline Ph of surface.
- Durability of residual Tack (glue factor) of several weeks.
Technical data
| Type | Acrylic copolymer |
|---|---|
| Aspect | Milky liquid |
| Color | White. When dry is transparent |
| Density | 1,10 Kg/l ± 2% |
| Solids Content | 58% ± 2% |
| Chlorides | Exempt |
| Shipping | Material not dangerous |
| Storing | Material not dangerous |
Use instructions
Apply directly over the surface, avoiding spilling the product, in a uniform way, without soaking.
Once applied the product, let it dry for a period of 30 minutes or till it is dry when you touch it.
It is applied using a brush or a varnish roller or even with an airless system.
In degraded surfaces repair the affected area and if needed apply a second layer and reinforce using the CIMENTART Fiber Glass Mesh.
Clean tools with water.
Efficiency
The efficiency of 1 kg CIMENTART Primer Plus: 10 to 14 m2, depending of the porosity and grade of absorption of the surface.
- 5 to 7 m2 on high absorption surfaces.
- 10 to 15 m2, on low absorption surfaces.
Presentation
Is presented in recipients of 1 kg, 5 kg, and 25 kg.
Storing
12 months, in a dry place protected from bad weather in its original recipient hermetically closed.
Overview
CIMENTART MICROCEMENT SL. Our systems are based in the research done at our laboratories and the many years of practical experience we have.
We guarantee that our products are manufactured, packaged and labeled under the rules of Normative ISO 9001:2008. We decline any responsibility if the end result is affected by external factors not under our control. The end user must check that the product supplied is adequate to the needs that is going to be used for, doing a test in any case that must be necessary.
Review date: 12-09-18.
The present document cancels the earlier editions.
The full text of the official CimentArt technical data sheet.